Alfa Romeo 145/ 146/ 155 Powerflex Front Lower Wishbone Rear Bush
Dispatched within 3-5 days
Warning: Last items in stock!
Spend £350.00 or more to qualify for 0% Interest Finance.
Only available to UK residents over 18, subject to terms and conditions.
|Vehicle Make||Alfa Romeo|
|Vehicle Model||145/ 146/ 155|
Powerflex Front Lower Wishbone Rear Bush
These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted. Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket. It is only possible to fit these bushes after removing the arms from the car. For arms fitted with the pressed steel rear bracket, the rubber bush may need to be burned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
Comes with Lifetime Warranty (terms apply)
Diagram Ref: 2
Quantity Required: 2
Pack Size: 2